Classic® Frameless Specifications

Classic Frameless Specifications

Model(A) LengthCapacity(B) HeightStandard Hoist
T 102/40 40 feet 49.0 cubic yards 57" 55" 8 1/4 - 280
T 102/39 39 feet 48.5 cubic yards 57" 55" 8 - 265
T 102/38 38 feet 47.3 cubic yards 57" 55" 8 - 265
T 102/37 37 feet 46.0 cubic yards 57" 55" 8 - 250
T 102/35 35 feet 43.5 cubic yards 57" 55" 8 - 235
T 102/33 33 feet 41.0 cubic yards 57" 55" 8 - 220
T 102/32 32 feet 39.7 cubic yards 57" 55" 8 - 220
T 102/30 30 feet 37.2 cubic yards 57" 55" 8 - 220
T 102/28 28 feet 34.6 cubic yards 57" 55" 8 - 190
T 102/26 26 feet 32.1 cubic yards 57" 55" 8 - 170

* FLOOR SHEET HEIGHT / SPRING AIR RID

MODELDUMP ANGLE(C) KING PIN TO CENTER REAR AXLE
T 102/40 45 degrees 439" (36' 7")
T 102/39 43 degrees 427" (35' 7")
T 102/38 45 degrees 415" (34' 7")
T 102/37 43 degrees 403" (33' 7")
T 102/35 44 degrees 397" (31' 7")
T 102/33 45 degrees 355" (29' 7")
T 102/32 46 degrees 343" (28' 7")
T 102/30 50 degrees 319" (26' 7")
T 102/28 46 degrees 295" (24' 7")
T 102/26 46 degrees 271" (22' 7")

Body

Tapered: From 96" at front to 102" at rear

Gate: Full overhead swinging with 12 degree slope, heavy-duty recessed hinges. Replaceable rubber seal

Aluminum Sheet: 5454 and 5083.

  • Nose .250 - Hoist box .250 - Tailgate .160
  • Side Sheet .160 - Floor .250

Aluminum Extrusions: 6061 - T6

  • 9" top rail - 8" side stakes, automatic machine wielded
  • 4" U channel crossmembers on 10 inch centers
  • Extra heavy members in key locations
  • 10" extruded front post and 9" extruded rear post

Tarp Rod: Pin striped, length of sides

Side turn signal: Mounted on diamond plated bracket

Side marker lights: Sealed beam, three per side

SUSPENSION / UNDERBELLY

Suspension: Single point 50,000 lb capacity, wide track, 3 leaf spring

Axles: 5" round, 5/8" wall, full 102" wide with interchangeable inner and outer bearings, "Big Spindle"

Hubs: 10 Hole, cast.

Brakes: 16.5x7 air-acuated. Premium lining. Auto slack adjusters. (Brake system complies with FMVSS 121)

Drums: Outboard

Tires: Steel belted radials 11R24.5

Tire Carrier: Standard

Paint: Black enamel, all steel parts, other colors optional

Mud Flaps: 24" x 40", anti sail. 1/2" rubber

Lift Arms: Full width heavy-duty steel, with drop legs

Hydraulic Cylinder: Front lift telescopic, 40-ton rated capacity (see above charts)

Wiring: Water tight plastic conduit

Lights: Sealed beam lights

Electrical Receptacle: 7-way ATA, 12-volt system

Note: Trailer conforms to applicable "Federal Motor Vehicle Safety Standards." All products, specifications, and features as described or illustrated are subject to change without notice.